J.c. Penny, Rome,new York How Do I Hem Curtains From J.c. Penny's That Are Not Even Sewn Correctly?

How do i hem curtains from j.c. penny's that are not even sewn correctly? - j.c. penny, rome,new york

Take the desired length plus 6 ". This allows a 3" double hem, determine the average length. Measuring points curtain from top to bottom, the length of cut mark. To do this, curtain panels on the left, right and center. This ensures a straight cut. Then with a ruler or a stick, point the marks and draw a line with a pencil. This is your cutting line. Take the veil of the ironing board and iron, a seam 3 ", while the 3 - 'iron back hem. Its result will be 3 double hem. A double hem for a curtain for proper hanging.
Sewing machine or later or not the hand of the border, put on weight over the front edge of sewing. This work is much easier than it seems. However, the most important part to measure accurately and the 3 dual-use "or even a double hem, 4-Hem, when the curtain is long enough. In addition, the wire is of the same color is a necessity. Hold the iron on a lower setting and do not go from there to the melt..

PS I do not recommend the band Iron Curtain HEMs, because if you are experiencing for the use of the band can lose the ring. In addition to possibly heat the iron to melt the tape too big for curtain fabric, resulting in a ruffled hem. UGH. But if you must use the iron on the tape, for example, that caution should be exercised. Iron the hem to desired length, and press well. Then place the iron on the tape on the top line and press / instead of the bottom with duct tape. Not on the tape in the ring of the iron ring before folding again with the iron.